Rod Fawcett in the WM workshop

Copyright resides with the original holder, no reproduction without permission

Save

 

 

 

 

 

 

 

 

 

 

 

The photo shows Radio WM engineer, Rod Fawcett, in the workshop at BBC Pebble Mill.

The following comments were left on the Pebble Mill Facebook Page:

Paul Hunt: ‘I’m guessing this is about 1988? I joined Dan Cooke as the second engineer there 5 years later with Tom Horsefield as the Engineer-in-Charge. The test set on the upper shelf is an ME2/5 (built by the BBC equipment department). Underneath is a Ferrograph RTS2 test set. On the bench is a DC power supply unit for powering equipment under test. Rod’s holding an AKG D130 which was the “standard” omni reporters mic that would be used with a UHER. The WM engineers workshop, room 104, had started life as the newsroom when Pebble Mill opened. It then moved upstairs to the 2nd floor and then back to the first floor in 1989 to be adjacent to TV news. It’s also worth noting the Dymo tape on the drawers – something very common in Local Radio stations!!’

Christopher Hall: ‘Top shelf, with black meter, is BBC ME2/5 audio test set, below it with white meter is Ferrograph RTS-2 audio test set, below it is an amplifier test rack, to left are two H&H AM8/12 loudspeaker amplifiers, below them is a Farnel power supply, and at the right of the bench is a Telequipment D66 oscilloscope.’

Keith Butler: ‘Isn’t the ‘scope a D66a, I think the earlier D66 was blue.’

Andy Walters: ‘My office for my first three years at WM. Room 104 with it’s views of the River Rae and plague of Ladybirds every autumn.’

George Tatler: ‘All this kit still looks current to me, i wish i had a modern dual PSU like the Farnell one. At the far end of the lower shelf is one of those Glensound Tele Balance Unit boxes with the sloping front that an old tele used to sit on top of – as used in district studios or simple NCA studio setups etc..’

Martin Cox: ‘The grey box lying on its face next to the LS3/5a might be a battery powered Level oscillator’

Susan Hillman: ‘Was just a few weeks ago that we were standing round a Farnell power supply at work and saying that they still looked the same as they ever did. This was in stark contrast to the oscilloscope which had an awful lot missing round the back’

Ian Dyer: ‘I moved an ME2/5 between bays only today whilst rationalising the old MKIII bays in Wiltshire post-ViLoR!’

Andy Walters: ‘The same room on WM’s last day at Pebble Mill in Summer 2004.’

Photo by Andy Walters, no reproduction without permission

Save

Save

Save

Save

Save

Save

Save